Autobody Painter/Prepper

About CSN Collision CSN Collision safely repairs more than 200,000 vehicles a year helping Canadians get back on the road with the trust and comfort of knowing their vehicle has been returned to like new condition. Since 2002, CSN has grown to become the leader in collision repair with 400+ collision repair Centres across Canada, USA and Italy. Position Summary: CSN Collision is looking for an Auto Body Technician to join our team. Our Auto Body Technician must be able to take a vehicle in a damaged state and repair or restore damaged vehicles to their original structural integrity, function, and appearance. The Incumbent is detailed oriented and can multitask to accommodate shifting priorities. Primary Objectives of the AutoBody (Collision Repair) Technician: Review damage report and estimates of repair cost and plan work to be performed Thoroughly examine collision damage (Review the complete vehicle exterior body parts, check all power accessories (door locks/windows/mirrors are operational) check that the dash panel has no warning lights on. Identify any prior damages overlooked on the QA checklist/ or related on the supplemental damage sheet.) Performing structural and complete body repairs: Repair and replace front end components, body components, doors and frame and underbody components. (Assess, Repair or Replace interior and exterior parts, electrical components, and vehicle accessories, doors and frame and underbody components) Straighten bent frames using frame and underbody pulling and anchoring equipment, Hammer out dents, buckles and other defects using blocks and hammers. Welding on vehicles with the use of MIG welders and compression spot welders. Fully dismantle the complete vehicle damaged areas including the blend panel parts in order to identify all hidden damages as early in the repair cycle as possible. For example remove damaged fenders, panels and grills using wrenches and cutting torch and bolt or weld replacement parts into place, repair or replace damaged windows, windshields and sunroof Ability to file, grind and sand repaired surfaces, using power tools and hand tools Mask and tape auto body surfaces in preparation for painting, apply primers and repaint surfaces. Operate soldering equipment or use plastic filler to fill holes, dents and seams Restore vehicle to factory specification (Return the vehicle back to factory/OEM specifications) Inspect repaired vehicles and test drive vehicles for proper handling Technician must be able to read and understand the estimates. Capable of reading and comprehending automotive repair procedures. Able to work with a variety of metals and plastics, as well as glass, electrical, and mechanical parts. Experience using frame and measuring equipment. Experience with disassembly and reassembly of vehicles Perform other duties as assigned by management. Requirements Auto Body Repair and refinishing experience - 3+ years required Auto Body Collision and Damage Repairer (310B) Red Seal License (310Q) (Preferred but not a must) or in a registered apprenticeship program. Technicians with I-Car and OEM certifications are favorable. I car Welding certification Carrying, Lifting – 100 lbs, standing, sitting, walking, reaching) Valid driver's license required Must have own tools, safety footwear. Up-to-date Compliance Training, such as AODA,WHMIS, Worker Health and safety Awareness and Workplace Violence and Harassment)and knowledge of Information Security PIPEDA 3 to 5 years of working Knowledge of Mitchell / Audatex Benefits What we offer: Supplemental Pay: Bonus Benefits: Health, dental, vision Paid time off Disclaimer: This job description may not be inclusive of all assigned duties, responsibilities, or aspects of the job described, and will evolve as CSN continues to grow   CSN is an Equal Employment Opportunity employer. Qualified applicants will receive consideration for employment regardless of age, race, colour, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. We strive to cultivate an inclusive, accessible environment, where all employees and customers feel valued, respected, and supported. We are dedicated to growing our corporate team in a way that reflects the diversity of our customers and communities in which we live and serve. If you require an accommodation for the recruitment/interview process (including alternate formats of materials, or accessible meeting rooms or other accommodation), please let us know and we will work with you to meet your needs. At CSN Collision, we’re always looking for passionate, skilled, and dedicated individuals who take pride in their work and want to be part of a collaborative and high-performing team. This posting is part of our ongoing efforts to proactively build a pipeline of talented professionals for future opportunities. If your background and experience align with what we’re looking for, a member of our team will reach out when a suitable opportunity arises. By applying, you’ll be joining our talent community, giving us the opportunity to connect with you when the timing is right. We appreciate your interest in CSN Collision and look forward to potentially working together in the future.

Victor Energy Ltd is a powerline contractor with over 30 years experience building Alberta’s electrical infrastructure, recently acquired by Java Holdings Ltd. Java staff have over 50 years of experience building some of Canada’s largest electrical infrastructure projects. Job description Reporting to the Fleet & Logistics Manager, the Heavy Equipment Technician will be responsible for diagnosing and completing repairs required on Victor Energy’s heavy equipment (Excavators, Digger Derrick Booms, Skid Steer, Drive Heads, and Loaders, picker trucks, tracked carriers, semi trucks, automotive and support equipment). Must have the ability to troubleshoot major and minor mechanical problems, as well as to repair and adjust all necessary mechanical components including hydraulic systems. Requirements Responsibilities: The successful candidate will be responsible for ensuring that Company equipment is maintained in a good working condition by inspecting, diagnosing, repairing, and servicing the fleet in the shop. Getting quotes for parts required for repairs will be necessary at times.   Key Skills: Work well with others Capable of working within a fast-paced environment Ability to follow direction, remains alert and maintain a high level of concentration Have good judgement and the ability to react quickly Able to effectively communicate both verbally and in writing Able to work well under pressure Strong attention to detail Able to deal with people sensitively, tactfully, diplomatically, and professionally at all times Qualifications: CVIP Certification Asset Class 5 driver’s license with acceptable abstract; Class 1 license preferred and reliable transportation. Experience with all aspects of off-road equipment, truck and transport equipment, automotive and small engine equipment. Experience with troubleshooting and repairing a variety of Cat/JD/KW/FL/JD equipment Experience with routine maintenance operations Familiar with computer diagnostic equipment. (Cat ET, Cummins, Navistar, SIS 2.0) Overtime will be required at times. Will have to work outdoors at times in all weather conditions. Possible field work at times. Must have own tools and toolbox. Benefits Extended Healthcare Plan (Medical, Disability, Dental & Vision) Group RRSP Group Life - AD&D - Critical Illness Insurance Training & Development Employee Assistance Program - Counseling

About CSN Collision CSN Collision safely repairs more than 200,000 vehicles a year helping Canadians get back on the road with the trust and comfort of knowing their vehicle has been returned to like new condition. Since 2002, CSN has grown to become the leader in collision repair with 400+ collision repair Centres across Canada, USA and Italy. Position Summary: CSN Collision is looking for an Auto Body Technician to join our team. Our Auto Body Technician must be able to take a vehicle in a damaged state and repair or restore damaged vehicles to their original structural integrity, function, and appearance. The Incumbent is detailed oriented and can multitask to accommodate shifting priorities. Primary Objectives of the AutoBody (Collision Repair) Technician: Review damage report and estimates of repair cost and plan work to be performed Thoroughly examine collision damage (Review the complete vehicle exterior body parts, check all power accessories (door locks/windows/mirrors are operational) check that the dash panel has no warning lights on. Identify any prior damages overlooked on the QA checklist/ or related on the supplemental damage sheet.) Performing structural and complete body repairs: Repair and replace front end components, body components, doors and frame and underbody components. (Assess, Repair or Replace interior and exterior parts, electrical components, and vehicle accessories, doors and frame and underbody components) Straighten bent frames using frame and underbody pulling and anchoring equipment, Hammer out dents, buckles and other defects using blocks and hammers. Welding on vehicles with the use of MIG welders and compression spot welders. Fully dismantle the complete vehicle damaged areas including the blend panel parts in order to identify all hidden damages as early in the repair cycle as possible. For example remove damaged fenders, panels and grills using wrenches and cutting torch and bolt or weld replacement parts into place, repair or replace damaged windows, windshields and sunroof Ability to file, grind and sand repaired surfaces, using power tools and hand tools Mask and tape auto body surfaces in preparation for painting, apply primers and repaint surfaces. Operate soldering equipment or use plastic filler to fill holes, dents and seams Restore vehicle to factory specification (Return the vehicle back to factory/OEM specifications) Inspect repaired vehicles and test drive vehicles for proper handling Technician must be able to read and understand the estimates. Capable of reading and comprehending automotive repair procedures. Able to work with a variety of metals and plastics, as well as glass, electrical, and mechanical parts. Experience using frame and measuring equipment. Experience with disassembly and reassembly of vehicles Perform other duties as assigned by management. Requirements Auto Body Repair and refinishing experience - 3+ years required Auto Body Collision and Damage Repairer (310B) Red Seal License (310Q) (Preferred but not a must) or in a registered apprenticeship program. Technicians with I-Car and OEM certifications are favorable. I car Welding certification Carrying, Lifting – 100 lbs, standing, sitting, walking, reaching) Valid driver's license required Must have own tools, safety footwear. Up-to-date Compliance Training, such as AODA,WHMIS, Worker Health and safety Awareness and Workplace Violence and Harassment)and knowledge of Information Security PIPEDA 3 to 5 years of working Knowledge of Mitchell / Audatex Benefits What we offer: Supplemental Pay: Bonus Benefits: Health, dental, vision Paid time off Disclaimer: This job description may not be inclusive of all assigned duties, responsibilities, or aspects of the job described, and will evolve as CSN continues to grow   CSN is an Equal Employment Opportunity employer. Qualified applicants will receive consideration for employment regardless of age, race, colour, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. We strive to cultivate an inclusive, accessible environment, where all employees and customers feel valued, respected, and supported. We are dedicated to growing our corporate team in a way that reflects the diversity of our customers and communities in which we live and serve. If you require an accommodation for the recruitment/interview process (including alternate formats of materials, or accessible meeting rooms or other accommodation), please let us know and we will work with you to meet your needs. At CSN Collision, we’re always looking for passionate, skilled, and dedicated individuals who take pride in their work and want to be part of a collaborative and high-performing team. This posting is part of our ongoing efforts to proactively build a pipeline of talented professionals for future opportunities. If your background and experience align with what we’re looking for, a member of our team will reach out when a suitable opportunity arises. By applying, you’ll be joining our talent community, giving us the opportunity to connect with you when the timing is right. We appreciate your interest in CSN Collision and look forward to potentially working together in the future.

Multi Auto Mecanique is currently seeking a highly skilled and dedicated Auto Mechanic to join our team. As an Auto Mechanic, you will be responsible for inspecting, maintaining, and repairing vehicles to ensure maximum reliability and functionality. With your expertise in complex mechanical and electrical systems, you will play a vital role in diagnosing and fixing issues efficiently. Responsibilities Inspect vehicle engines and mechanical/electrical components to accurately diagnose issues Inspect vehicle computer and electronic systems to repair, maintain, and upgrade Conduct routine maintenance work such as replacing fluids and lubricating parts Schedule future maintenance sessions and provide valuable advice to motorists on proper vehicle use Repair or replace broken or dysfunctional parts and effectively resolve issues Provide accurate estimates for repair or maintenance jobs Maintain detailed records of work and issues Ensure that equipment and tools are properly maintained and in good condition Requirements Proven experience as an auto mechanic Excellent knowledge of mechanical, electrical, and electronic components of vehicles Strong understanding of vehicle diagnostic systems and methods Ability to effectively handle various tools and heavy equipment Demonstrated commitment to observing all safety precautions High school diploma or equivalent; Certification from a vocational school or completion of an apprenticeship is preferred Valid certification (e.g., ASE) is a definite plus Benefits A full time and permanent position. 40 hours/week - Monday to Friday from 8:00am to 5:00pm Salary base on experiences/skills Two (2) weeks pay during the Holidays Two (2) weeks vacations pay Two (2) Paid Sick Days or Personal Days Work Uniforms and Security Boots offers and paid for after one (1) year

About CSN Collision CSN Collision safely repairs more than 200,000 vehicles a year helping Canadians get back on the road with the trust and comfort of knowing their vehicle has been returned to like new condition. Since 2002, CSN has grown to become the leader in collision repair with 400+ collision repair Centres across Canada, USA and Italy. Position Summary: CSN Collision is currently hiring a skilled and meticulous Auto Body Prepper/ Painter to become a valued member of our team. The primary duties of the Auto Body Prepper involve preparing vehicles for the painting process, which includes tasks such as sanding, priming, and masking. This role also offers the potential for advancement within our paint department. Key Responsibilities: Sand the vehicle surfaces using sandpaper, grinders, or other tools to create a smooth surface for painting Apply masking tape and paper to protect areas of the vehicle that will not be painted Prepare surfaces for painting by cleaning, sanding, and applying primer Ensure proper adhesion of paint by removing dirt, debris, and imperfections from the surfaces Assist with mixing paint and primers according to manufacturer specifications Assist with operating and maintaining painting equipment and tools Collaborate with the painting team to ensure efficient workflow and high-quality work Perform other duties as assigned by the supervisor or manager Requirements 2+ years of previous experience as an Auto Body Prepper/Painter or in a similar role Knowledge of different types of sanding and masking techniques Familiarity with automotive paints, primers, and painting equipment Ability to work independently and as a team player Excellent attention to detail and ability to follow instructions Strong problem-solving and time management skills Physical stamina to perform repetitive tasks and work in a fast-paced environment Valid driver's license High school diploma or equivalent Benefits What we offer: Supplemental Pay: Bonus Benefits: Health, dental, vision Paid time off Disclaimer: This job description may not be inclusive of all assigned duties, responsibilities, or aspects of the job described, and will evolve as CSN continues to grow   CSN is an Equal Employment Opportunity employer. Qualified applicants will receive consideration for employment regardless of age, race, colour, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. We strive to cultivate an inclusive, accessible environment, where all employees and customers feel valued, respected, and supported. We are dedicated to growing our corporate team in a way that reflects the diversity of our customers and communities in which we live and serve. If you require an accommodation for the recruitment/interview process (including alternate formats of materials, or accessible meeting rooms or other accommodation), please let us know and we will work with you to meet your needs. At CSN Collision, we’re always looking for passionate, skilled, and dedicated individuals who take pride in their work and want to be part of a collaborative and high-performing team. This posting is part of our ongoing efforts to proactively build a pipeline of talented professionals for future opportunities. If your background and experience align with what we’re looking for, a member of our team will reach out when a suitable opportunity arises. By applying, you’ll be joining our talent community, giving us the opportunity to connect with you when the timing is right. We appreciate your interest in CSN Collision and look forward to potentially working together in the future.

Please apply directly to this website >>> https://jobs.fillarole.ca/job-board/jobs/595/otr-tire-repair-technician/edmonton-ab Job Duties: Inspect tires on-site to determine whether they can be repaired safely Complete preventative and corrective repairs. This will include skiving, patching, filling, and final inspection Set-up, take-down and monitor the tire vulcanizing machine, ensuring the correct cure times are being preformed Drive Fountain Tire mobile tire repair truck to and from the mine sites Ensure all inventory is stocked and that all tooling is in safe working order Participate in all safety initiatives, as required or assigned, to guarantee safety at Fountain Tire. This includes adhering to jurisdiction’s Mines Act and client safety procedures and regulations. Experience in the repair and vulcanization process of OTR tires Other duties that apply. Requirements Employment contingent on successful pre-access drug test Punctual Willing to work in extreme weather conditions Proven ability to develop and maintain effective relationships with team members and customers; this includes good communication, interpersonal and problem-solving skills. Willing to work and live in camps as required until jobs are complete Able to lift 50 lbs Willing to travel to remote locations with minimal notice and work weekends, evenings, on call shiftwork and holidays. Ability to maintain a valid class 5 driver’s license and provide a satisfactory Driver’s Abstract from the province of residence. Ability to use computerized equipment Computer literate Benefits Extended Medical and Dental plus RRSP matching - Flights and travel costs are provided to sites as required at no cost. Living out allowance where applicable. Please apply directly to this website >>> https://jobs.fillarole.ca/job-board/jobs/595/otr-tire-repair-technician/edmonton-ab