Mazda B4000

Description

4x4 works, hi and lo Work done within last year: All u joints, All shocks Front springs Radius arm bushings Camber/caster adjustment bushings Tie rods Pitman arm Ball joints, upper and lower Manual locking hubs Axle pivot bushings Brake calipers and pads Has been very reliable since I got it. Everything that makes it safe to drive has been done. Every once in a while it will stumble when first fired up but once you give it some gas and let it run for a moment it clears up. I suspect there is a little air intrusion in the fuel line by the filter under the cab. Fuel filter was janky when I got it, I made it a little less janky. Hasn't been bad enough for me to worry about. Little bit of vibration from the driveshaft, the shop that did initially did the ujoints did butchers work (radium gas plus) and didnt use alignment marks when reinstalling. I redid the ujoints and balanced the shaft good enough to drive. If you want it to last, take it to a driveline shop and get it balanced.